Home Page Home Page Lazzeroni - Quality rifles and ammunition for the discriminating hunter
Rifles Long Magnums Short Magnums Reloading Data Ordering Dealers
 

Lazzeroni Caliber 7.21 (.284) Firebird

 

  
A T T E N T I O N
  
Please do not be one of those hand loaders who is going to search through this information just to find the stated "MAXIMUM" load and start with that.
  
There is much more to determining your maximum load than just how much powder you can dump in the case.
  
Temperature, bullet type, bullet weight, bullet seating depth, barrel twist, grove diameter, chamber throat profile. These are just a few of the variables that can affect velocity and pressure.
  
In our never-ending search for high velocity, anyone can overload a cartridge to achieve "BRAGGING RIGHTS".
  
In doing so however, you risk damaging your rifle, endangering yourself and those around you.
  
The following information will assist you in working up an accurate, high velocity load for your rifle in a safe and prudent manner.
  
A good set of reloading dies, a quality set of calipers, an accurate powder scale and a reliable chronograph are some of the items you will need.
  
Begin by firing the first shot with the starting load and record seating depth and velocity.
  
Increase the powder charge no more than 1 grain at a time. If you experience ANY ONE of the following signs of pressure, reduce your powder charge by 10% and consider that your maximum load. Never exceed the maximum load stated in the following chart regardless of whether or not any pressure signs are apparent.

1. If you begin to see pressure signs on the primer such as flattening or "cratering" around the firing pin dent.
2. If enough brass flows into the ejector pin hole on the bolt face so as to cause a shiny spot or dent when the cartridge is ejected.
3. When ejecting the fired cartridge, the bolt is sticky or hard to lift.
  
  
Test Components
  
  Maximum Case Length 2.810"
  Trim-To Length 2.790"
  Primer Used FED 215
  Primer Size Large Rifle, Magnum
  RCBS Shell Holder #14
  Jacketed Bullets Used Nosler Partition 140GR
 Nosler Partition 150GR
Nosler Partition 160GR
  
Test Specifications (Velocity and Pressure)
  
  Firearm Used: Pressure Test Rifle
  Barrel Length: 27"
  Twist: 12"
  Groove Diameter: .284"
 
   
140 Grain Nosler Partition 3.550 O.A.L. @ 70F
POWDER
TYPE
SUGGESTED
STARTING GRAINS
ABSOLUTE MAXIMUM
LOAD IN GRAINS
VELOCITY
IN F.P.S.
PRESSURE
IN P.S.I.
DuPont
IMR 7828
91GR 97GR 3721 65,800
Alliant
Reloader 25
96GR 102GR 3726 65,700
Accurate
8700
106GR 113GR 3729 66,000

  

150 Grain Nosler Partition 3.550 O.A.L. @ 70F
POWDER
TYPE
SUGGESTED
STARTING GRAINS
ABSOLUTE MAXIMUM
LOAD IN GRAINS
VELOCITY
IN F.P.S.
PRESSURE
IN P.S.I.
Dupont
IMR 7828
88GR 94.5GR 3612 65,900
Alliant
Reloader 25
93GR 99.5GR 3604 65,400
Accurate
8700
103GR 110GR 3619 66,200

  

160 Grain Nosler Partition 3.550 O.A.L. @ 70F
POWDER
TYPE
SUGGESTED
STARTING GRAINS
ABSOLUTE MAXIMUM
LOAD IN GRAINS
VELOCITY
IN F.P.S.
PRESSURE
IN P.S.I.
DuPont
IMR 7828
86GR 92GR 3501 66,100
Alliant
Reloader 25
91GR 97GR 3507 65,100
Accurate
8700
100GR 107GR 3506 65,400

  

Your rifle may have a different barrel length, groove diameter or twist rate than used for the rifles manufactured by Lazzeroni Arms Company.

Under no circumstances should you exceed the maximum powder charges stated in these specifications.

<< Return to Reloading Data